Ricoh AFICIO MP C2030 Security Reference page 87
Hide thumbs
Also See for AFICIO MP C2030:
- Operating instructions manual (136 pages) ,
- Specifications (2 pages) ,
- Service manual (1171 pages)
Table of Contents
Advertisement
2.
Select [IPv4 Address 1], [IPv4 Address 2], [IPv4 Address 3], [IPv4 Address 4] or [IPv4
Address 5] using [ ] or [ ], and then press the [OK] key.
3.
Enter the Start IPv4 Address, and then press the [OK] key.
You can specify the IPv4 address range to which this setting is applied.
4.
Enter the End IPv4 Address, and then press the [OK] key.
Be sure the number you enter for End IPv4 Address is larger than that for
Start IPv4 Address.
5.
Select [Parallel Interface (Sim.)] using [ ] or [ ], and then press the [OK] key.
6.
Select [Apply] using [ ] or [ ], and then press the [OK] key.
Integration Server Authentication
3
85
Advertisement
Table of Contents
