Speaker Level - Yamaha RX-V1800 Owner's Manual

Hide thumbs Also See for RX-V1800:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Subwoofer phase SUBWOOFER PHASE
Use this feature to switch the phase of your subwoofer if
bass sounds are lacking or unclear.
A)SPEAKER SET
SUBWOOFER PHASE
>NORMAL REVERSE
Choice
NORMAL
Does not change the phase of your subwoofer.
(normal)
REVERSE
Sets the phase of your subwoofer to reverse.
(reverse)
Presence/surround back channel priority
PRIORITY
Use this feature to prioritize either the presence or the
surround back speakers when playing back 2-channel
audio sources using the sound field programs.
A)SPEAKER SET
PRIORITY
PRNS >SUR.B
Choice
PRNS
Uses the presence speakers.
SUR.B
Uses the surround back speakers.
y
For details about the sound output from each speaker in sound
field programs, refer to "Sound output in each sound field
program" in "APPENDIX" at the end of this manual.
Functions
Functions
Customizing this unit (MANUAL SETUP)

Speaker level

B)SPEAKER LEVEL
Use this feature to manually balance the speaker levels
between the front left or surround left speakers and each
speaker selected in "SPEAKER SET" (see page 77).
Control range: –10.0 dB to +10.0 dB
Control step: 0.5 dB
Initial setting:
FR.L/FR.R/SWFR/PR.L/PR.R: 0 dB
CENT./SUR.L/SUR.R/SB L/SB R: –1.0 dB
B)SPEAKER LEVEL
1/2
.
FR.L
FR.R
CENT.
SUR.L
SUR.R
SPEAKER LEVEL
FR.L
Front left speaker
FR.R
Front right speaker
CENT.
Center speaker
SUR.L
Surround left speaker
SUR.R
Surround right speaker
SB L
Surround back left speaker
SB R
Surround back right speaker
SWFR
Subwoofer
PR.L
Presence left speaker
PR.R
Presence right speaker
y
• If your subwoofer can adjust the output volume and the
crossover frequency, set the volume to about half way (or
slightly less) and set the crossover frequency to the maximum.
• Set "TEST TONE" to "ON" to output the test tone for the
"SPEAKER LEVEL" setting (see page 80).
Notes
• The available speaker channels differ depending on the setting
of the speakers.
• Instead of "SB L" and "SB R", "SB" is displayed if "SUR. B L/
R SP" is set to either "SMLx1" or "LRGx1" (see page 78).
B)SPEAKER LEVEL
2/2
.
SB L
SB R
SWFR
PR.L
PR.R
Adjusted speaker
79
En

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents