Yamaha RX-V1800 Owner's Manual page 106

Remote control features
Default macro functions
Pressing
macro button
STANDBY
POWER
TUNER
CD
CD-R
MULTI CH IN
MD/TAPE
DVD
BD/HD DVD
PHONO
DTV/CBL
DVR
VCR
V-AUX/DOCK
*1 You can turn on some components (including Yamaha components) connected to this unit by connecting them to the AC
OUTLET(S) on the rear panel of this unit. Power control may not be synchronized with this unit depending on the component.
For details, refer to the operating instructions for the connected component.
*2 When the remote control code for your TV is set up for either DTV/CBL or PHONO (see page 99), you can turn on the power of
your TV without selecting an input source. The remote control code set up for DTV takes priority over the one for PHONO.
*3 When TUNER is selected as the input source, this unit plays the last station received before the unit was set in the standby mode.
*4 Playback can be started for any Yamaha remote control-compatible MD recorder, CD player, CD recorder, DVD player, Blu-ray
Disc player, HD DVD player or DVD recorder. When using macros to operate other components, you will need to program the play
button on the input area of that component (see page 101) or set a remote control code (see page 99) in advance.
104
En
To automatically transmit these signals in order
First Second
STANDBY
(*1)
POWER
POWER
POWER
MULTI CH IN
MD/TAPE
POWER
BD/HD DVD
(*1)
PHONO
DTV/CBL
V-AUX/DOCK
Third
—
(*2)
POWER
TV
—
(*3)
TUNER
CD
(CD area) (*4)
CD-R
(CD-R area) (*4)
(MD/TAPE area) (*4)
DVD
(DVD area) (*4)
(BD/HD DVD area) (*4)
DVR
(DVR area) (*4)
VCR
(VCR area) (*4)
—
—
—
—
—
—
—
—
—