Chapter 17: Pppoe - Avaya Secure Router 3120 Command Reference Manual

Chapter 17: PPPOE

Use these commands to configure the PPPoE feature.
Note:
PPPoE requires Release 8.3 or higher and is supported only on 1000-series routers.
interface virtual-access
This command accesses the PPPoE virtual-access interface.
syntax:
interface virtual-access <name>
parameter
name
example:
SR/configure>interface virtual-access test
show interface virtual-access
applies to:
T1, E1 module
ip negotiated
This command specifies that the IP address for the interface is obtained via PPP/IPCP (IP
Control Protocol) address negotiation with the PPPoE server.
syntax:
ip negotiated
Avaya Secure Router 3120 Command Reference Guide
The label given to this interface.
next-level commands
definition
December 2010 799