Chapter 21: Telnet - Avaya Secure Router 3120 Command Reference Manual

Chapter 21: TELNET

Use the telnet command to telnet directly from one Avaya Secure Router 3120to another Secure Router
3120 (or network host). This feature eases network configuration by eliminating the need to exit the Router
CLI before establishing a telnet session.
The telnet command is as follows:
Table 53: Telnet Command
telnet
telnet
This command establishes a Telnet session directly from a Secure Router to another Secure
Router or network host.
parameter
ipaddress
portno
syntax: telnet ipaddress < IP address > [ portno < n > ]
example: SR> telnet 10.1.100.16
applies to: All modules
Avaya Secure Router 3120 Command Reference Guide
IP address of another Secure Router or network host
Port number
The default is 23.
definition
December 2010 915