Features - Amprobe AM-530 User Manual

FEATURES

AM-520 / AM-520-EUR is designed for HVAC applications with key functions
such as temperature, micro amps used for flame sensor troubleshooting, as
well as and capacitance to check the motor startup capacitors. The AM-520 /
AM-520-EUR measures a complete range of electrical parameters and features
a built in flashlight, a "third hand" probe holder and VoltTect non-contact
voltage detection. Safety rated to CAT III 600V.
AM-530 / AM-530-EUR is the fully-featured multimeter of choice for the
professional electrical contractor. Measure and verify presence of voltage in
order to connect equipment or to perform repairs, run new wiring, check
continuity of electrical connections, identify blown fuses, troubleshoot motors
or check transformers. The AM-530 / AM-530-EUR features Truerms sensing
to accurately measure voltage on systems affected by harmonics, a built in
flashlight to detect wire colors in the dark, a "third hand" probe holder and
non-contact voltage detection. Safety rated to CAT III 600V.
• Measurements: Voltage up to 600VAC and 600VDC, AC/DC current,
Resistance, Frequency, Capacitance, Temperature.
• Frequency, Capacitance, Duty Cycle for troubleshooting applications
• Special Functions:
- Non-contact Voltage Detection
- Audible continuity
- Diode Test
• Backlit LCD display with analog bar graph
• Events:
- Data hold
- MAX / MIN Memory
- Relative zero mode
• Built in work light (flashlight)
• Built in test leads storage and "third hand holder"
• Auto and Manual ranging
• Auto power off
• Low battery warning
• Velcro strap to hang a meter
• Safety: CAT III 600V
4