Features - Amprobe AM-560 User Manual

1.800.561.8187

FEATURES

The multimeter designed for professional HVAC technicians. The AM-560
measures a complete range of electrical parameters and features. Key
functions include: temperature, capacitance to check the motor startup
capacitors, micro amps for flame sensor troubleshooting, and a low pass filter
to take accurate measurements on variable frequency drives. With a built-
in flashlight, and non-contact voltage detection, the AM-560 is the choice
multimeter for the professional HVAC technician. This meter is safety rated to
CAT IV 600V and CAT III 1000V for the most advanced HVAC troubleshooting
needs.
The Amprobe AM-570 is a fully featured multimeter designed for professional
electricians who need to maintain service or troubleshoot advanced electrical
systems. True-rms sensing accurately measures voltage on systems affected by
harmonics; built-in flashlight allows you to identify wires while working in
dark conditions, and non-contact voltage detection allows for quick go-no-go
checks without the need for an additional tool. The AM-570 also features dual
input temperature measurement, a low-impedance function to detect stray
voltage, and a low pass filter to accurately take measurements on variable
frequency drives. Safety rated to CAT IV 600V and CAT III 1000V for use in the
most industrial applications.
• Measurements: AC/DC Voltage up to 1000V, ac/dc current, Resistance,
Frequency, Capacitance, Temperature, duty cycle.
• Special Functions:
- Low Z - to detect "ghost" voltages (for AM-570 only)
- Low pass filter for variable frequency drives
- Non-contact Voltage detection
- Audible continuity
- Diode test
• Dual reading backlit LCD display with analog bargraph
• Events:
- Data hold
- MAX / MIN memory
- Peak hold (crest)
- Relative zero mode
• Built-in flash light
• Built-in test leads storage and "third hand holder"
• Warning against improper test leads connection
www.
4
information@itm.com
.com