Quick Setup; Method One: Via The Wps Button - TP-Link TL-WA820RE User Manual

Chapter 2
2. 1.

Quick Setup

2. 1. 1. Power on
Plug the extender into an electrical outlet
RE LED is solid on.
2. 1. 2. Connect to the host network
There are two ways to connect to the host network: via the WPS button or via a web
browser. Using the WPS button is an easier way to extend your host network. We
recommend you to use this way if your router has a WPS button. The button might look
like one of these:

Method One: Via the WPS button

1. Press the WPS button on your host router, and then press the WPS/RESET button
on your extender within 2 minutes.
WPS/
RESET
Tips:
• Some ISP gateways disable the WPS function by default. If the WPS connection fails, please refer to
Two: Via a web browser.
• For more information about using WPS button on your host router, please refer to the router manufacturer's
user guide.
2. Relocate your extender referring to
near your host
.
Position Your extender.
Set Up Internet Connection
router, and then wait until the
Method
7