Positioning And Levelling - AEG L 82470 BI User Instructions

13.2 Positioning and levelling

Never place cardboard, wood or
similar materials under the ma-
chine to compensate for any un-
evenness in the floor.
If it is impossible to avoid positioning
the machine next to a gas cooker or
coalburning stove, an insulating panel
covered with aluminium foil on the side
facing the cooker or stove, must be in-
serted between the two appliances.
13.3 The inlet hose
45 45 45 O O O
20 20 20
O O O
• Install the machine on a flat hard floor.
• Make sure that air circulation around
the machine is not impeded by car-
pets, rugs etc.
• Carefully level by screwing the adjust-
able feet in or out.
• After having levelled the appliance,
tighten the lock nuts.
• The appliance must be level and sta-
ble.
Before placing it on small tiles, apply a
rubber coating.
The water inlet hose and the drain hose
must not be kinked.
CAUTION!
The machine must not be instal-
led in rooms where the tempera-
ture can drop below 0°C.
• Connect the hose to the appliance.
Turn the inlet hose only left or right.
Loose the ring nut to set it in the cor-
rect position.
ENGLISH
29