AEG L8FBE842 User Manual
  1. Manuals
  2. Brands
  3. AEG Manuals
  4. Washer
  5. L8FBE842
  6. User manual

AEG L8FBE842 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
L8FBE842
USER
MANUAL
EN
User Manual
Washing Machine

Advertisement

Table of Contents
loading

Related Manuals for AEG L8FBE842

Summary of Contents for AEG L8FBE842

  • Page 1 L8FBE842 User Manual Washing Machine USER MANUAL...

  • Page 2: Table Of Contents

    16. ACCESSORIES......................37 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.

  • Page 3: Safety Information

    ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.

  • Page 4: Safety Instructions

    The appliance must be connected to the water mains • using the new supplied hose sets, or other new hose sets supplied by the Authorised Service Centre. Old hose sets must not be reused. • If the mains power supply cable is damaged, it must •...

  • Page 5: Installation

    ENGLISH to be replaced, this must be carried • This appliance is for household use out by our Authorised Service Centre. only. • Connect the mains plug to the mains • Follow the safety instructions on the socket only at the end of the detergent packaging.
  • Page 6 5. Carefully put down the appliance WARNING! with the rear side on it. Use the gloves. 6. Put the front polystyrene packaging element on the floor under the 1. Remove the external film. If appliance. necessary, use a cutter.
  • Page 7 ENGLISH WARNING! Do not put cardboard, wood or equivalent materials below the appliance feet to adjust the level. 10. Remove the three bolts by using the key supplied with the appliance. The appliance must be level and stable. 11. Pull out the plastic spacers. A correct adjustment of the 12.
  • Page 8 2. Position it toward left or right You can extend the drain depending on the position of the hose to maximum 400 cm. water tap. Contact the authorized service centre for the other drain hose and the extension. It is possible to connect the drain hose in different ways: 1.

  • Page 9: Product Description

    ENGLISH 5. Without the plastic hose guide, to a sink spigot - Put the drain hose in the spigot and tighten it with a clamp. Refer to the illustration. The end of the drain hose must always be ventilated , i.e.
  • Page 10 4.2 Appliance overview 11 12 Worktop Drain hose Detergent dispenser Inlet hose connection Control panel Mains cable Door handle Transit bolts Rating plate Hose support Drain pump filter Feet for levelling the appliance...

  • Page 11: Control Panel

    ENGLISH 5. CONTROL PANEL 5.1 Control panel description 11 10 Programme dial Delay start touch button (Início Display Diferido) Steam Plus touch button (Vapor Plus) Eco touch button (Eco) Time saving touch button (Extra Spin reduction touch button (Centrif.) Rápido) Rinse touch button (Aclarado/Enxag.) •...
  • Page 12 5.2 Display Maximum load indicator. The indicator flashes during the laundry load estimation (refer to ProSense load detection paragraph) . Maximum laundry indicator. It blinks if the laundry amount exceeds the declared load. Door locked indicator. Delay start indicator.

  • Page 13: Dial And Buttons

    ENGLISH Time saving indicator. Spin speed indicator. Rinse hold indicator. Extra silent indicator. Temperature indicator. The indicator appears when a cold wash is set. 6. DIAL AND BUTTONS Touch this button repeatedly until the 6.1 On/Off desired temperature value appears on Pressing this button for a few seconds the display.
  • Page 14 The intermediate and the final Select this option to pre-treat heavily spinning phases are suppressed and soiled or stained laundry using stain the programme ends with water in the remover. drum. This helps to reduce creasing. Pour the stain remover into...

  • Page 15: Programmes

    ENGLISH Touch the button repeatedly to set the the washing programme. Touch this required delay. The time increases by button once to decrease the duration. steps of 30 minutes up to 90' and from 2 • In case of smaller load, touch this hours up to 20 h.
  • Page 16 Programme Programme description White cotton and coloured cotton. Normal soil and light soil. Standard programmes for the Energy Label consumption Algod. values. According to regulation 1061/2010, the programme Al- god. at 60 °C and the programme Algod. at 40 °C with the option are respectively the «Standard 60°C cotton pro-...
  • Page 17 ENGLISH Programme Programme description White cotton items. This programme removes micro-organ- isms thanks to a washing phase with the temperature main- Anti-Alergia tained above 60°C for several minutes. This helps remove germs, bacteria, micro-organism and particles. An additional rinsing phase ensures a proper removal of detergent residues and pollens/allergenic items.
  • Page 18 Programme temperature, maximum spin speed and maximum load Programme Default tempera- Maximum spin speed Maximum ture Spin speed range load Temperature range Washing programmes 40 °C 1400 rpm 8 kg 95 °C - Cold 1400 rpm - 400 rpm Algod.
  • Page 19 ENGLISH Programme options compatibility Options ■ ■ ■ ■ ■ ■ ■ ■ ■ Centrif. ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Drenar ■ ■ ■ ■ ■ ■...

  • Page 20: Settings

    7.2 Woolmark Apparel Care - Company for the washing of wool garments labelled as «hand wash» Green provided that the garments are washed according to the instructions issued by the manufacturer of this washing machine. Follow the garment care label for drying and other laundry instructions.

  • Page 21: Before First Use

    ENGLISH To activate/deactivate this option touch 8.5 Soft Plus the Temp. button and the Centrif. button Set the Soft Plus option to optimise the simultaneously until the indicator fabric softener distribution and improve comes on/goes off above the the fabric softness. indicator.
  • Page 22 10.3 Filling the detergent and additives 3. To use powder detergent, turn the flap up. Compartment for prewash phase, soak programme or stain remover. Compartment for washing phase. Compartment for liquid additives (fabric conditioner, starch). Maximum level for quantity of liquid additives.
  • Page 23 ENGLISH With the flap in the In case a selection is not position DOWN: possible, no indicator comes • Do not use on and an acoustic signal gelatinous or thick sounds. liquid detergents. • Do not put more 10.6 Starting a programme liquid detergent than Touch the Início/Pausa button to start the limit shown on...
  • Page 24 Changing the delay start after this case, it will be not possible to guarantee the best washing results. the countdown has started About 20 minutes after the To change the delay start: programme start, the 1. Touch the Início/Pausa button to programme duration could pause the appliance.
  • Page 25 ENGLISH 10.10 Interrupting a In the display the related door lock indicator goes off. programme and changing the 2. Open the appliance door. If options necessary, add or remove the items. 3. Close the door and touch the button When the programme is running, you Início/Pausa.

  • Page 26: Hints And Tips

    10.15 Stand-by option • The display shows the indicator , the option indicator and the The Stand-by function automatically deactivates the appliance to decrease door locked indicator . The the energy consumption when: indicator of the running phase • You do not use the appliance for 5 flashes.

  • Page 27: Care And Cleaning

    ENGLISH • A very small load can cause balance • To help the environment, do not use problems with the spin phase leading more than the recommended quantity to excessive vibration. If this occurs: of detergent. a. interrupt the programme and •...
  • Page 28 12.2 Descaling 12.5 Cleaning the drum Regularly examine the drum to prevent If the water hardness in your rust forming. area is high or moderate, we recommend that you use a For a complete cleaning: water descaling product for 1.
  • Page 29 ENGLISH Clean the drain pump if: • The appliance does not drain the water. • The drum does not turn. • The appliance makes an unusual noise because of the blockage of the drain pump. • The display shows the alarm code WARNING! •...
  • Page 30 Let the water flow 10. Clean the filter under the water tap. out. 11. Put the filter back into the special guides by turning it clockwise. Make sure that you tighten the filter correctly to prevent leakages.
  • Page 31 ENGLISH 12.8 Cleaning the inlet hose and the valve filter It is recommended to clean both the filters of the inlet hose and valve occasionally to remove any deposit, collected over the time: 1. Remove the inlet hose from the tap and clean the filter.

  • Page 32: Troubleshooting

    13. TROUBLESHOOTING WARNING! Refer to Safety chapters. 13.1 Introduction The appliance does not start or it stops during operation. First try to find a solution to the problem (refer to the table). If the problem persists, contact the Authorised Service Centre.
  • Page 33 ENGLISH Problem Possible solution • Make sure that the water tap is open. • Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority. The appliance does not • Make sure that the water tap is not clogged. fill with water properly.
  • Page 34 Problem Possible solution • Make sure the levelling of the appliance is correct. Refer to The appliance makes an 'Installation instruction'. unusual noise and vi- • Make sure that the packaging and/or the transit bolts are brates. removed. Refer to 'Installation instruction'.

  • Page 35: Consumption Values

    ENGLISH 2. Disconnect the mains plug from the 5. Take out the laundry and then close mains socket. the appliance door. 3. Open the filter flap. 6. Close the filter flap. 4. Pull twice the emergency unlock trigger downward and open the appliance door.

  • Page 36: Technical Data

    Programmes Load Energy Water Approxi- Remain- (kg) consump- consump- mate pro- ing mois- tion (kWh) tion (litre) gramme ture (%) duration (minutes) 0.49 Standard 60°C cotton 0.38 Standard 60°C cotton 0.34 Standard 40°C cotton 1) At the end of spin phase.

  • Page 37: Accessories

    Read carefully the instructions supplied top of the washing machine only by with the accessory. using the correct stacking kit manufactured and approved by AEG. 17. ENVIRONMENTAL CONCERNS appliances marked with the symbol Recycle materials with the symbol with the household waste. Return the...
  • Page 38 www.aeg.com...
  • Page 39 ENGLISH...
  • Page 40 www.aeg.com/shop...

Table of Contents