2) After Set The Items According To The Above Tables - Hitachi C47-WD8000 Service Manual

SERVICE ADJUSTMENTS
[16：9 Model]
Value
No.
Items
1 Model Select1:ASPECT
2 Model Select2:DESTINATION
3 Model Select3:LIGHT
4 Model Select4:MULTI_PICTURE
5 Model Select5:COLOR_MANAGER
6 Model Select6:PC
7 Model Select7:IR_BLASTER
8 Model Select8:PHOTO
9 Model Select9:TEXT
10 Model Select10:HDMI
11 Model Select11:SUB-Y/C
12 Model Select12:SRS

(2) After set the Items according to the above tables.

(a) Select item No.837(INIT3) in service menu and press and hold the [recall] key on the remote handset until the
OSD background changes to yellow. (It takes about 3 seconds.)
(b) Wait until the OSD background color becomes normal (It takes several 10 seconds.) , this means initialization
is completed and each settings become preset condition according to the model .
Do not unplug the outlet or perform any key operation until the initialization is completed.
(3) Check the setting state displayed on the upper right of the service menu.
V100-FFFF FC100-FFFF MC100
No. Data
0: 0
1: 0
2: 0
3: 1
Models
WD8000
1
1
1
1
1
1
1
1
2
1
1
1
001111110011
27
16：9
The state of Model Select setting
・From the left to the 1st figure：The state of Model Select1
・From the left to the 12th figure：The state of Model Select12
......