Hitachi C47-WD8000 Service Manual page 48

SERVICE ADJUSTMENTS
(11)
4:3 model
The digital convergence has 3 modes; NTSC 60p, PAL 100i and PAL 50p.
Change the other mode then adjust again (1) ~ (10).
16:9 model
The digital convergence has 4 modes; NTSC 60p, PAL 100i, PAL 50p
and PAL HD. (＊) Change the other mode then adjust again (1) ~ (10).
(＊) Setting procedure of PAL HD mode.
(a) Receive 1080i(50Hz).
(b) Set the Scan Mode to HD.
(c) Set the Picture Mode to Favorite.
(d) Set Picture Size to 16:9 mode.
NOTES:
(1) [CH Ⅰ/Ⅱ] button ・・・ Crosshatch/Video mode
Press [CH Ⅰ/Ⅱ] 5 times to display external signal.
Press [CH Ⅰ/Ⅱ] 5 times again to return to DCU internal cross-hatch.
(2) [MENU] button ・・・ Remove color mode
Press [MENU] to switch between all colors displayed or adjustment color and green only.
✧Press [0], then press [MENU]
✧Press [▲/ CH up], then press [MENU]
✧Press [▼/ CH down], then press [MENU]
Film Mode : Off
Dynamic Contrast : Off
Color Manager : Off
Red and green displayed (Blue removed)
Blue and green displayed (Red removed)
Only green displayed
48