Hitachi C47-WD8000 Service Manual page 53

TROUBLE SHOOTING
Digital convergence remote control
ROM WRITE
CALCULATION
CURSOR UP
CURSOR LEFT
CURSOR DOWN
GREEN
(3×3 ADJ.*)
REMOVE COLOR
ADJUSTMENT
NOTE:3×3 Adjustment mode can be selected only after DCU uncorrected state.
(DCU uncorrected state:With the power off,press and hold the SERVICE ONLY button,then press
the power ON/OFF button at the same time until power is applied...Release both.)
53
RASTER POSITION
PHASE
ROM READ
CURSOR RIGHT
BLUE
(13×9 Fine ADJ.)
RED (5×7 ADJ.)
INITIALIZE
CROSSHATCH/
VIDEO MODE