Set-Up-Upgrades - Hitachi 70VS810 Service Manual

II. FEATURES AND FUNCTIONS
4.3 SET-UP - UPGRADES
Upgrades
Setup
CableCARD Info
Set AV Control
Upgrades
Quick Start Up
Move Select
SEL
Insert MMC card, then press the CURSOR PAD
upgrading.
NOTE:
Any power interruption during the upgrade process will cancel the upgrade. When this happens, repeat the upgrade
procedure.
Quick Start Up
Setup
CableCARD Info
Set AV Control
Upgrades
Quick Start Up
Move Select
SEL
It shows software information and easy upgrade procedure. This function allows the TV software to be
upgraded by using a flash card (MMC Card). If a future software upgrade is required for your TV, Hitachi will
notify and provide you with a flash card. In order to receive written notification and the flash card, please com-
plete and return the warranty card.
,
This feature will select Quick Start Up options. Set this feature to ON to have the TV tune channels (both
Analog and Digital) quickly when first turning the TV on. Set this feature to OFF to save electricity. Selecting
ON for the Quick Start Up feature will activate the TV tuners circuits when the TV is in "standby mode" which
is commonly referred to as "off". This will allow you to quickly tune to channels when first turning the TV on.
Digital signals often change and this feature will monitor any changes and prepare the television to quickly
present a picture. A small amount of electricity is used to continually monitor signals when this feature is
selected.
Setup
Upgrades
to highlight "Upgrade Now". Press the SELECT button to select and start
Setup
Quick Start Up
Select ON to have the TV tune
channels quickly at 1st turn on.
Select OFF to save electricity.
Move
35
Software Version #: Main
MMC Software Upgrade
Upgrade Now
Please insert MMC card
before upgrading.
Move Select
SEL
Off On
Select
SEL
LC48/B-LC47/B/K
VXX.XX