D Receiving A Position Request Call - Icom GM600 Instruction Manual

[Pause]: Pauses the countdown.
• To restart the countdown,
push [Resume]
[Accept]: Enters the DSC Task mode.
DSC Task mode
• Monitor the channel specified by the
calling station for an announcement
from the calling station.
(Example: Channel 16)
• Rotate [CH/ENT] to view the call
contents.
• See page 28 for details of the Task
mode's software key functions.
r Push [Standby Mode]
to the Main screen.

D Receiving a Position Request Call

NOTE: When "Position ACK" is set to
"Auto," the transceiver automatically
replies to the call. Both the TX and RX
.
calls are stored in the Transmitted and
Received Call Logs. (Default: Manual)
q When a Position Request call is
received:
• Alarm sounds.
• The following screen is displayed
and the backlight blinks.
• " " is displayed and "
w Push any [Alarm Off]
e Select your desired action.
to return
DSC OPERATION
[Hold]:
Holds the RX call task, and return to
the previous screen.
[ACK (Unable)]:
Sends an acknowledgment with no
position and time data.
[ACK (Able)]:
Sends an acknowledgment with
position and time data.
[Accept]:
Enters the DSC Task mode.
" blinks.
DSC Task mode
• Rotate [CH/ENT] to view the call
.
contents.
• See page 28 for details of the Task
mode's software key functions.
r Push [Standby Mode]
to the Main screen.
TIP: See page 48 for details of
sending an acknowledgement.
8
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
to return
63