Sending A Non-Distress Call - Icom GM600 Instruction Manual

8
DSC OPERATION

■ Sending a Non-Distress call

To ensure correct operation of the DSC
function, confirm you correctly set the
Channel 70 squelch level. (p. 74)
NOTE:
• Emergency channel (Channel 70) is
automatically selected for calling.
• If Channel 70 is busy, the transceiver
stands by until the channel becomes
clear.
D Sending an Individual call
The Individual call function enables
you to transmit a DSC signal to
only a specific coast station or
ship. After transmission, wait for an
acknowledgement from the receiving
station.
You can communicate by voice after
receiving the acknowledgement 'ACK
(Able).'
42
q Push [Compose Non-Distress]
to display the COMPOSE NON-
DISTRESS screen.
Push
• To display the screen from the Menu
screen:
([MENU] > Compose Non-Distress)
w Push [ENT].
e Select the desired individual
address, or "Manual Input," then
push [ENT].
(Example: STATION1)
When you select "Manual Input" in step
e, push the keypad to manually enter
the desired Individual ID. (p. 23)
Push
Rotate
+
Push