Setting The Call Channel - Icom GM600 Instruction Manual

5
BASIC OPERATION
■ Selecting a channel (Continued)
TIP: After receiving a signal or you
operate the transceiver, the transceiver
enters the Radio Telephone (RT) mode.
In the RT mode, you can make a
voice communication except for the
DSC operation.
• "
" is displayed while in the RT mode.
• "
" is displayed when the RT mode
task is activated.
• "
" or " " disappears if no operation
occurs during the preset period of time.
(p. 80)
• The following software key functions are
not displayed in the RT mode.
[Compose Distress]
[Compose Non-Distress]
[Compose DROBOSE]
14

■ Setting the Call channel

You can set the Call channel with your
most often-used channel for quick recall.
q Push [MENU] to display the MENU
screen.
w Rotate [CH/ENT] to select
"Radio Settings," then push [ENT].
e Rotate [CH/ENT] to select
"Call Channel," then push [ENT].
r Rotate [CH/ENT] to select the
desired channel to be set as the Call
channel, then push [ENT].
Rotate
• Goes back to the previous screen, after
+
pushing [ENT].
Push
t Push [MENU] to return to the Main
screen.
TIP: To confirm that your setting is
correctly set, hold down [16/C] for 1
Rotate second. (p. 13)
+
Push
Rotate
+
Push