Dsc Operation - Icom GM600 Instruction Manual

r Select "Category," then push [ENT].
t Select the desired option, then push
[ENT].
(Example: Routine)
When you select a coast station
in step e, the voice channel is
automatically specified by the coast
station. Therefore, skip steps y and
u, and go to step i.
y Select "Channel," then push [ENT].
u Select the desired voice channel,
then push [ENT].
i Push [Call]
Individual call.
Rotate
+
Push
o After sending, the following screen is
displayed.
• See page 28 for details of the Task
Rotate
mode's software key functions.
+
Push
!0 When the acknowledgement is
to send the
received:
• Alarm sounds.
• The following screen is displayed.
Push
!1 Push any [Alarm Off]
!2 Push any [Close Call RCVD Window]
When you receive "ACK (Unable)" in
step !0 , skip step !3 , and go to step !4 .
!3 Hold down [PTT] to communicate.
!4 Push [Standby Mode]
to the Main screen.
NOTE:
After receiving the acknowledgement:
• The voice channel specified in step
selected.
• A different voice channel is selected if the
station you called cannot use the channel.

DSC OPERATION

(Example: ACK (Able))
.
.
to return
8
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
is
u
43