D Receiving A Position Request Call - Icom IC-M506 Instruction Manual

7
DSC OPERATION
D
Receiving a Position Request Call
When a Position Request Call is received:
The alarm sounds for 2 minutes.
"RCVD POS REQUEST" pops up. The LCD backlight
blinks for 2 minutes.
q
Push [ALARM OFF] to stop the alarm and the blinking
backlight.
may appear, depending on the received Category.
w Push a soft key to select your desired action.
61
[IGN]
Push to ignore the Call and return to the normal operat-
ing mode.
" continues to blink and the Call is stored in the Received
Call Log.
[INFO]
Push to display the Received call information. (p. 65)
[ACK]
Push to display the "POSITION REPLY" screen and
send a reply to the Call. (p. 47)
When "POSITION ACK" is set to "Auto TX," the transceiver
automatically replies to the Call. In that case, both the TX
and RX calls are stored in the Transmitted and Received
Call Logs.