Philips DVD741VR Owner's Manual page 36

H9231CD(EN).QX3 02.9.5 7:13 PM
36 Timer Recording (cont'd)
8
Press the Number 1 button to record in SP speed
or the Number 2 button to record in SLP speed.
(See the chart below.) You cannot use the SPEED button at
this time.
ONE TIME PROGRAM
PROGRAM
CHANNEL
TIME ON
TIME OFF
REC SPEED
SP=1 SLP=2
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
9
Press two Number buttons for the month and two
Number buttons for the day you want to record the
program. For example, for July 10, 2002, press 07, 10.The
day of the week and the year will appear automatically. (You
cannot program the DVD/VCR to record more than one
year in advance.)
ONE TIME PROGRAM
PROGRAM
CHANNEL
TIME ON
TIME OFF
REC SPEED
START DATE
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
10
Press DISPLAY/STATUS/EXIT. PROGRAM WAS
COMPLETED/PLEASE PUSH TIMER-SET FOR TIMER
RECORDING will appear on the screen briefly. (If PRO-
GRAM NOT COMPLETED appears, try again from step 1.)
11
Press TIMER SET. The TIMER light will appear on the
front of the DVD/VCR.The DVD/VCR will be in DVD
mode.The VCR/TV light will disappear, meaning the
DVD/VCR is in TV position.
If the timer recording will take place several hours or days
from now, you may use the DVD/VCR until time for the
recording. (See Helpful Hints at right.) Press TIMER SET a
few minutes before the recording starts.
If you forget to press TIMER SET, PLEASE PUSH TIMER-SET
FOR TIMER RECORDING flashes on your TV screen two
minutes before a timer recording starts. Press CLEAR to
remove the message, then press TIMER SET.
Tape Speeds
This chart shows the recording/playback time for
three types of video cassettes (T160,T120, and
T60).There are three playback speeds: SP, LP, and
SLP.You can record in SP or SLP speed.You can-
not record in LP speed.
The slower the tape speed, the more recording you
can put on a tape. SLP is the slowest tape speed.
Page 36
1
10
09:30 PM
11:00 PM
SLP
1
10
09:30 PM
11:00 PM
SLP
07/10/02
WED.
8
9
10
• When all timer recordings are finished,
the TIMER light will flash.To use the
DVD/VCR again as usual, press TIMER
SET to disable the flashing TIMER light,
then press VCR/TV to select VCR posi-
tion.The green VCR/TV light will appear.
Press OUTPUT SELECT to choose VCR
or DVD mode, then continue with other
features as described in this manual.
• When timer recordings are set, the
TIMER light will appear.To use the
DVD/VCR as usual until time for the
recording, press the TIMER SET button
so that the TIMER light disappears.
Press VCR/TV to choose VCR position.
The VCR/TV light will appear. Press
OUTPUT SELECT to choose VCR or
DVD mode, then continue with other
features as described in this manual.
Cassette type/Playback Time
Tape Speed T160
SP 2 hrs.
(standard play)
40 mins.
LP 5 hrs.
(long play)
20 mins.
(playback only)
SLP 8 hrs.
(super long play)
POWER
MARKER
SETUP AUDIO SUBTITLE ANGLE
REC/OTR REPEAT REPEAT
A-B
CHANNEL/SKIP
CLEAR
TITLE MODE RETURN
OUTPUT SELECT
DVD VCR
DISC
MENU OK
STOP PLAY
REW FF
PAUSE
11
TIMER SET
1 2 3
VCR/TV
4 6
5
MEMORY
7 8 9
SPEED
+ 10
0
SEARCH MODE DISPLAY ZOOM SLOW
TIME SEARCH STATUS/EXIT
Helpful Hints
T120 T60
2 hrs. 1 hr.
4 hrs. 2 hrs.
6 hrs. 3 hrs.