Philips DVD741VR Owner's Manual page 11

H9231CD(EN).QX3 02.9.5 7:13 PM
This connection will let you use the features of both the VCR and the DVD Player.
ANT-IN
ANT-OUT
CH3 CH4
Antenna or
1
Cable TV
Signal to
ANT-IN Jack
1
Connect the antenna or Cable TV signal to the ANT -IN (Antenna In)
jack of your DVD/VCR.
2
Connect the red and white audio cables (supplied) to the red and
white DVD/VCR AUDIO OUT jacks on the DVD/VCR and to the red
and white AUDIO IN jacks on the TV, matching the cable colors to
the jack colors. If the TV has a single AUDIO IN jack, use the white audio
cable to connect the DVD/VCR's white DVD/VCR AUDIO OUT jack to the
TV's AUDIO IN jack.You will not use the red cable.
3
Connect the yellow video cable (supplied) to the DVD/VCR VIDEO
OUT jack on the DVD/VCR and to the VIDEO IN jack on the TV.
For better DVD picture quality, connect an S-Video cable (not supplied) to the S-
VIDEO OUT jack on the DVD/VCR and to the S-VIDEO IN jack on the TV instead.
However, the S-Video connection only supplies video (picture) for the DVD Player of
the DVD/VCR.Therefore, in order to use the VCR features or view TV channels at the
DVD/VCR, you still need to either connect the RF coaxial cable between the ANT-OUT
jack of the DVD/VCR and the TV's Antenna In jack, or connect the yellow video cable
as described earlier.To connect the supplied RF coaxial cable, see step 2 on page
eight.
4
Connect the power cords of the TV and the DVD/VCR to a power
outlet.Turn on the TV and set it to the correct Audio/Video In chan-
nel. If you are using the red/white/yellow audio/video cables for VCR or DVD
playback, choose the Audio/Video In channel at your TV. If you are using the S-
Video cable for DVD playback, choose the S-Video In channel at your TV. If you
are using the RF coaxial cable for VCR or DVD playback, choose channel 3 or
4 at the TV. See your TV owner's manual for more details. Or, simply continue
changing channels at the TV until you see VCR or DVD playback on the TV
screen.
5
You are ready to turn on the DVD/VCR. Go to page 15 before turn-
ing on the DVD/VCR.
Page 11
DVD/VCR to a TV that has Audio and Video In jacks
Using the supplied red, white, and yellow cables
DVD/VCR
IN
L
AUDIO
R
VIDEO
Hookups (cont'd) 11
COMPONENT
OUT
VIDEO OUT
DVD/VCR
Y
AUDIO OUT
DIGITAL AUDIO OUT
S-VIDEO
PCM/MULTICHANNEL
L Cb OUT
COAXIAL
R Cr
3
Video Cable
2
Audio Cables
Audio and
Video IN Jacks
on TV