3. Attach the Front Stabilizer (3) to the Base (2)
with two M10 x 60mm Bolts (115), two M10
Washers (112), and two M10 Locknuts (116).
4. While a second person holds the Console Mount
(66) near the Handlebar Post (7), route the frame
wires and cable (A) upward through the Console
Mount.
Avoid pinching the wires and cable (A). Attach
the Console Mount (66) to the Handlebar Post
(7) with four M4 x 8mm Screws (129); start all
the Screws, and then tighten them.
3
4
Avoid pinching the
wires and cable (A)
10
115
2
3
112
116
66
129
A
7
Scaled 125%