Samsung ML-2150 Service Manual page 91

T RO U B L E S H O OT I N G
7.1.11 Ghost (3) : Fuser
• Description Ghost occurs at 82 or 92 mm intervals.
Digital Printer
Digital Printer
Digital Printer
Digital Printer
Digital Printer
Digital Printer
7.1.12 Satins on the Face of Page
• Description The background on the face of the printed page is stained.
Digital Printer
Digital Printer
Digital Printer
Digital Printer
Digital Printer
Service Manual
7-6
Check and Cause
The temperature of the fuser is maintained
high.
Check and Cause
1. Toner leakage due to improperly sealed
toner cartridge.
2. If the transfer roller is contaminated, stains
on the face of page will occur.
Solution
1. Disassemble the fuser and remove the
contaminated toner particles on the roller
and clean the foreign matter between
Thermistor and Heat roller.
( Caution: can be deformed)
Solution
1. Replace the toner cartridge.
2. If the transfer roller is contaminated, run PC
Cleaning Mode Print 2 or 3 times.
And perform Self-Test 2 or 3 times to
remove contamination.
Samsung Electronics