Disassembly and Reassembly
5.16 Fuser Ass'y
1. Before you remove the Fuser Ass'y, you should
remove:
- Rear Cover Refer to the 5.12)
2. Remove four screws and take out the Fuser
Ass'y.
3. Remove two screws and take the Thermostat
out of the Fuser Ass'y.
4. Remove one screw, and then take out the
Thermister from the Fuser Ass'y.
Service Manual
5-12
Fuser Ass'y
Thermostat
Thermistor
5. Remove two screws and take the Halogen
Lamp out of the Heat Roller.
6. Remove three screws and take out the Gear
bracket.
7. Remove two screws and divide the Fuser into
two parts.
Halogen Lamp
Gear Bracket
Fuser Upper Unit
Samsung Electronics