Samsung ML-2150 Service Manual page 61

5.23 Retard Ass'y
1. Before you remove the Retard Ass'y, you should
remove:
- MPF Ass'y (Refer to the 5.3)
- Main Drive Ass'y (Refer to the 5.7)
- Top Cover (Refer to the 5.13)
- Inner Cover (Refer to the 5.15)
2. Remove two screws. Then lift the Roller Ass'y,
as shown below.
Roller Ass'y
3. Take out the Gear, as shown below.
Samsung Electronics
4. Remove the lock equipment and rotate the
Bearing as shown below.
5. Slide the shaft (gear side) to the left side as
shown in the picture. Next, left side of the sjaft
to the right side. Be careful not to mass up with
the Holder Pad ass'y.
Retard Gear
Disassembly and Reassembly
2
Bearing
1
Service Manual
5-21