Samsung ML-2150 Service Manual page 58

Disassembly and Reassembly
5.21 REGI Ass'y
1. Before you remove the REGI Ass'y, you should
remove:
- Top Cover (Refer to the 5.13)
2. Unplug the Harness, Remove 3 screws.
3. Release the lock as shown below and lift up the
Gear Cap.
4. Take out the Regi. Ass'y as shown below.
REGI Ass'y
Service Manual
5-18
Gear Cap
5. Remove one screw and take out the Regi.
Sensor.
REGI Sensor
Sensor Holder
6. Unplug the Harness, remove one screw and
take out the PTL PBA.
PTL Upper
PTL PBA
Samsung Electronics