5.22 MP Pick Up Ass'y
1. Before you remove the MP Pick Up Ass'y, you should
remove:
- MPF Ass'y (Refer to the 5.3)
- Main Drive Ass'y (Refer to the 5.7)
- Top Cover (Refer to the 5.13)
- Inner Cover (Refer to the 5.15)
2. First of all remove two screws. Lift up the MP
Pick Up Shaft for taking out the MP Pick Up
Rack.
Rack
MP Pick Up
Rack
3. Remove the E-Rings on both ends of Gear
Ass'y and remove Ass'y as shown below.
E-Ring
Samsung Electronics
4. Pull and remove the lock equipment, then rotate
the Bearing as shown below.
5. Slide the cam to the left by pulling on the MP
Pick-up shaft
Gear Ass'y
Disassembly and Reassembly
Bearing
Cam
MP Pick Up Shaft
Service Manual
5-19