Nec Application And Driver Cd - NEC POWERMATE 2000 Service And Reference Manual

NEC Application and Driver CD

Use the NEC Application and Driver CD to reinstall NECC-provided software,
including
!
applications
!
utilities and device drivers
!
NEC INFO Center (online documentation).
You can also use the NEC Application and Driver CD at any time to restore an
application, driver, or utility.
Note
OS Restore CD, the full restore process loads all the
factory-installed software that came with the system.
If you add NECC hardware options specified for the system, you can use the
NEC Application and Driver CD to install the drivers for the options.
Install the software from the NEC Application and Driver CD as follows.
1. Power on the system.
2. Insert the auto-start Application and Driver CD into the CD-ROM drive. The
Selective Restore screen appears, prompting you to select an application or
driver from the list.
3. Click on an application, driver, or utility in the "Applications/Drivers:"
window.
4. Read the information given in the "Important Setup Information:" window.
5. Click
Install
install your selection.
6. Click
Exit
7. Remove the CD from the CD-ROM drive when the installation is complete.
: If you perform a full system restore using the NEC
to install your selection. Follow any on-screen instructions to
to close the Application and Driver program.
System Configuration 2-25