NEC POWERMATE 2000 Service And Reference Manual page 80

7. Check that the LCD panel swivels side-to-side and tilts up and down. If it
does not, check the alignment of the collar tab.
8. Secure the cables with a cable tie inserted through the hole in the hard drive
bay and around the cables. Do not snug up the cable tie. Leave enough slack
in the tie to allow cable movement as the LCD panel is positioned side-to-
side.
9. Install the system board and plate assembly (see "System Board and Support
Plate Assembly Removal" earlier in this section).
Disassembly and Reassembly 3-23