Philips DVDR 75 Owner's Manual page 73

5
Confirm with OK .
a
b The channel number of the TV channel has not yet been assigned to
the PlusCode number. Using C , D or the number buttons 0..9 on
the remote control, select the corresponding channel number (name)
of the TV channel and confirm with OK .
a
b The entered PlusCode number is incorrect. Repeat your entry or
cancel using the SYSTEM-MENU button.
b Check the time/date (see 'Setting the time & date' in 'Installing your
DVD recorder').
a
b A daily recording was entered for the wrong day. Daily programming
can only be used for recordings to be made from Monday to Friday.
6
The decoded data appears after confirmation. You can go back
and change the data. Select the appropriate input field with C or
D . Change the information with D , C or the number buttons
0..9 .
Use the SELECT button to select '
' ' and '
Select '
Using CH- B , select the recording mode '
7
If all information is correct, press the
information is stored in a TIMER block.
8
To end, press TIMER .
9
Insert a recordable disc in the Recorder.
The disc is checked.
10 Switch the Recorder off with STANDBY m .
The programmed recording will only function properly when the
DVD Recorder
STANDBY m button.
If any of the TIMER blocks are in use, '
Programming a recording (TIMER)
' or '
'.
' using C .
,
has been
' will light up on the display.
' in the input fields
, , , , '.
OK button. The
using the