Philips DVDR 75 Owner's Manual page 38

Some TV programs broadcast additional audio (SAP - Secondary Audio Program). In most cases
this means an additional language is available. In most cases this means that an additional language
is available. For example, if a program is available in English and Spanish, Spanish can be broadcast
as the additional audio program (SAP).
To record TV programs in stereo or SAP, you can select Stereo or SAP as the default setting.
This setting does not become active until the sound of a TV program is transmitted in Stereo or
SAP.
When you playback the recording, you can playback the sound only in the setting you selected
for recording (a recording in SAP can be played back only in SAP).
1
Switch on the TV. If required, select the channel number for the
DVD Recorder (channel 3 or 4).
2 Turn on the DVD Recorder by pressing STANDBY/ON m .
3
Press SYSTEM-MENU on the remote control. The menu bar
will appear.
4 ' using D or C .
Select '
5
Select the line '
confirm with C .
6
Select line '
7
Select '
with OK .
If the setting for '
broadcasts only in stereo during recording, the recording will be done in
stereo.
8
To end, press SYSTEM-MENU .
CH- B or
' using
' and confirm with C .
' using CH- B or CH+ A and confirm
' or '
' is '
CH+ A and
' but the TV channel
Installing your DVD recorder