Table of Contents
Advertisement
Available languages
Available languages
1
If the inserted disc has been write-protected or it is a finalized
DVD+R, playback starts automatically.
2
If playback does not start automatically, select the title you want
to play from the index screen using CH- B or CH+ A .
You can also use the N or O buttons on the front of the
recorder.
3
Press the PLAY G button.
The following will appear on the display:
title/chapter number, elapsed time.
a
b There are no recordings on this disc.
4
To stop playback, press STOP h on the remote control or
STOP h on the DVD recorder.
5
To eject the disc, press OPEN/CLOSE J on the front of the
DVD recorder.
During playback, the device will automatically switch to the proper mode
'
,
,
,
For more information, please read the section 'Selecting the recording
mode (picture quality)' in the chapter 'Manual recording'.
You can also use the DVD Recorder to play audio CDs
1
Insert an audio CD. Playback starts automatically.
If the TV is turned on, the Audio CD display will appear on the screen.
During playback, the number of the current track will be shown on the
screen and display.
2
Stop playback with STOP h . Track number and total play time
are displayed.
,
,
,
'.
Playback
Advertisement
Table of Contents
