Philips DVDR 615/17 User Manual page 42

If the time is incorrect, this could be due to a weak or disrupted TV signal. If this is the case,
switch off the automatic function.
1
Press SYSTEM-MENU on the remote control. The menu bar
will appear.
2
' using D or C .
Select '
3
Select line '
with C .
4
Select line '
with C .
5
Select '
6
Confirm with OK .
7
Change the time in line '
your remote control.
8
Check '
To select between the fields, use CH- B or CH+ A .
Change the information with D , C or the number buttons
0..9 .
9
Select one of the following settings in line '
' ': The time set corresponds to the summer time (summer
time is on)
' ': The time set corresponds to the winter time (summer time
is off)
10
When all settings are correct, confirm with OK .
11
To end, press SYSTEM-MENU .
If the setting has been confirmed with OK the automatic system is disabled.
' using CH- B or CH+ A and confirm
' using CH- B or CH+ A and confirm
' with CH- B or CH+ A .
' using the number buttons 0..9 on
', ' ', ' ', and ' ' in the same way.
':
Installing your DVD recorder