Heat & Glo ST-36TR-IFT Owner's Manual page 19

Light Bulbs
Frequency: As needed
By: Qualifi ed Service Technician
Tools needed: Protective gloves, replacement light bulbs,
5/16 in. nut driver
In the lower gas valve compartment you will fi nd three
access panels for the three light bulbs. See Figure 4.3
Figure 4.3 Access Panel
1. Unplug the electrical cord as shown Figure 13.1.
2. Remove the two bolts using a 5/16 in. nut driver. See
Figure 4.4.
Figure 4.4 Remove Bolts
3. Pull the access panel to expose the light bulb. Wear-
ing clean cotton gloves, replace the bulb. Any skin
oils which get on a new bulb will greatly reduce the life
of the bulb. The bulb can be cleaned with isopropyl
alcohol. See Figure 4.5.
Figure 4.5 Replace Bulb
Heat & Glo • ST-36TR-IFT, PIER-36TR-IFT Owner's Manual • 2482-981 Rev. B • 3/17
19