Planning The Installation Process - Sun Microsystems Ultra 40 M2 Installation Manual

Planning the Installation Process

Use the following flowchart as a process tool to assist you with installation of the
Sun Ultra 40 M2 Workstation.
Unpack the workstation and familiarize
yourself with the workstation features.
Connect the workstation and external device
cables.
Power on the workstation.
Configure the preinstalled operating system
or install another operating system.
If necessary, install the supplemental drivers
from the Sun Ultra 40 M2 Workstation Tools
and Drivers CD.
If necessary, enable the secondary
PCI-Express card.
FIGURE 1-1
2 Sun Ultra 40 M2 Workstation Installation Guide • November 2006
START
Yes
Install optional
components?
No
READY TO WORK!
Process for Setting Up the Sun Ultra 40 M2 Workstation
See "Package Contents Inventory" on page 3
"Front and Back Panel Features" on page
To install DIMMs, graphic
accelerators, PCI cards, hard
Install
drives, tape drives, or CD or
optional
DVD drives, see the Sun Ultra
.
components
40 M2 Workstation Service,
Diagnostics, and Troubleshooting
Manual or the component
documentation.
See "Cabling the Workstation" on page
See "Planning the Installation Process" on page 2
See "Setting Up the Operating System and
See "Installing an Additional Operating System
and Drivers" on page 13.
See "Enabling the Secondary PCI-E Graphics
Card" on page 18.
and
4.
9.