Step 9 Start Icemaker; Step 10 Temperature Controls; Step 11 Install Toekick - GE ZFSB23DSS Installation Instructions Manual

STEP 9 START ICEMAKER

Power Switch
• Slide the switch to ON position. The icemaker
will not begin to operate until it reaches its
operating temperature of 15°F (–9°C) or below.
It will then begin operation automatically. It will
take 2–3 days to fill the ice bin.
• Be sure nothing interferes with the sweep of the feeler
arm. Do not place objects in the path of the feeler arm.
• Discard the first full bucket of ice cubes.
• To turn the icemaker off, set the switch to OFF.
Installation Instructions
Feeler Arm
STEP 10 TEMPERATURE
CONTROLS
• The temperature controls are preset at 37°F for the
refrigerator and 0°F for the freezer.
• Allow 24 hours to stabilize before making adjustments.

STEP 11 INSTALL TOEKICK

• Press toekick into position and reinstall one screw on
each side.
IMPORTANT: The vented toekick must remain
unobstructed for proper air circulation.
10
Toekick Screw
213Dia5