Table 2-8 Pipe Mounting Procedure; Figure 2-9 Pipe Mounting Brackets - Honeywell DR4500A Product Manual

Installation - Mounting Methods
Mounting on a 2-inch pipe
Refer to Figure 2-9 and follow the procedure in Table 2-8 to mount your recorder on a 2-inch pipe.
Step
1
Using the eight plastite screws supplied with the pipe mounting bracket kit, attach the two
mounting brackets (flat side against the case) to the back of the recorder. Refer to Figure 2-9
for location.
2
Position the recorder with brackets on the 2-inch pipe.
3
Install the U-bolts around the pipe and through the bracket holes. Secure with lockwashers and
hex nuts provided.
24 DR4500A Classic Series Circular Chart Recorder With or Without Control Product Manual

Table 2-8 Pipe Mounting Procedure

Hex Nut

Figure 2-9 Pipe Mounting Brackets

Action
Pipe Mounting
Washer
Bracket
Rear
of
Case
U-bolt
Plastite
Screw
24224
Release M
April 2017