Environmental Protection; Technical Specifications - Metabo W 22-230 Operating Instructions Manual

N Steel wire brushes (always use with the hand
guard attached.)
O Bench cut-off stand
For complete range of accessories, see
www.metabo.com or refer to the main catalogue.
11. Repairs
Repairs to electrical tools must be carried out
by qualified electricians ONLY!
Any Metabo power tool in need of repair can be sent
to one of the addresses listed in the spare parts list.
Please enclose a description of the fault to the
power tool.

12. Environmental Protection

The sanding dust generated may contain
hazardous materials: do not dispose of with the
household waste, but at a special collection point
for hazardous waste.
Metabo packaging is 100% recycled. Scrap power
tools and accessories contain large amounts of
valuable resources and plastics that can be
recycled.
These instructions are printed on chlorine-free
bleached paper.

13. Technical Specifications

Explanation of details on page 3. Subject to
changes serving technical progress.
D = Maximum sanding disc diameter
max
t = max. permitted thickness of clamping
max,1
shank on accessory when using clamping
nut (11)
t = Roughing disc/Parting disc:
max,3
max. permitted thickness of accessory
M = Spindle thread
l = Length of the grinding spindle
n = No-load speed (maximum speed)
I = Current at 120 V
120 V
HP = Horse power
m = Weight without mains cable
Wear ear protectors!
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
ENGLISH en
11