Accessories; Repairs; Environmental Protection; Technical Specifications - Metabo W 18 LTX 115 Original Instructions Manual

ENGLISH
ENG

11 Accessories

Use only genuine Metabo accessories.
If you need any accessories, check with your
dealer.
The dealer needs to know the exact model of your
power tool in order to select the correct accessory.
See page 4.
A Chargers
B Battery pack
C Roughing disc (always use with safety guard
attached)
D Louver disc (always use with safety guard
attached)
E Parting safety guard.
F Parting disc (always use with parting safety
guard attached)
G Diamond discs (always use with safety guard
or parting safety guard attached)
H Hand guard (for attaching under the additional
side-mounted handle.)
I Extension piece (for working with supporting
discs. Increases the distance between the
spindle and the supporting disc by approx. 35
mm)
J Supporting disc for fibre discs (always attach
using the supporting disc clamping nut
supplied.) (always use with the hand guard
attached.)
K Fibre discs (always use with the hand guard
attached.)
L Semi-flexible sanding discs (for use with
elastic supporting disc 6.23279) (always use
with hand guard attached.)
M Sanding pad with Velcro (always use with the
hand guard attached.)
N Adhesive sanding disc (always use with the
hand guard attached.)
O Adhesive fleece (always use with the hand
guard attached.)
P Steel wire brushes (always use with the hand
guard attached.)
Q Adjusting nut (15)
R Clamping nut (tool-free) (2)
S Dust filter (12)
For a complete range of accessories, see
www.metabo.com or the main catalogue.

12 Repairs

Repairs to electrical tools must be carried out
by qualified electricians ONLY!
Any Metabo power tool in need of repair can be
sent to one of the addresses listed in the spare
parts list.
20
Please enclose a description of the fault when
sending the tool for repairs.

13 Environmental Protection

The sanding dust generated may contain
hazardous materials: do not dispose of with the
household waste, but at a special collection point
for hazardous waste.
Metabo's packaging can be 100% recycled. Scrap
power tools and accessories contain large
amounts of valuable resources and plastics that
can be recycled.
Only for EU countries: Never dispose of
power tools in your household waste! In
accordance with European Guideline 2002/
96/EC on used electronic and electric equipment
and its implementation in national legal systems,
used power tools must be collected separately
and handed in for environmentally compatible
recycling.
These instructions are printed on chlorine-free
bleached paper.

14 Technical Specifications

Explanation of details on page 2 . Subject to
changes serving technical progress.
U = Voltage of battery pack
D = Maximum sanding disc diameter
max
t = max. permitted thickness of clamping
max,1
shank on accessory when using
clamping nut (15)
t = max. permitted thickness of clamping
max,2
shank on accessory when using
"Quick"clamping nut
(2)
t = Roughing disc/Parting disc:
max,3
max. permitted thickness of
accessory
M = Spindle thread
l = Length of the grinding spindle
n = No-load speed (maximum speed)
P = Nominal power input
1
P = Power output
2
m = Weight without mains cable
Vibration total value (vector sum of three
directions) determined in accordance with
EN 60745:
a = Vibration emission value (sanding
h, SG
surfaces)
a = Vibration emission value (sanding
h, DS
with sanding pad)
K = Uncertainty (vibration)
h,SG/DS