If you wish to upgrade to the next largest terminal box at a later date, please contact the
manufacturer.
Depending on the shaft height, the following terminal boxes are used for connecting the cables:
Table 3-4
Shaft height
315
315 ... 355
315 ... 450
315 ... 450
315 ... 450
①
Note
Rotating the terminal box
Depending on the version, the terminal box can be rotated. It can then be rotated through
increments of 90° corresponding to the connection direction.
If required, contact your Service Center (Page 137).
Supplementary devices
Depending on the order, various supplementary devices can be installed or mounted. These
include sensors for bearing temperature monitoring or winding monitoring, for example.
Anti-condensation heating (option)
The machine is fitted with anti-condensation heating. The connection data is listed on an
additional plate on the machine.
SIMOTICS TN Series N-compact 1LA8
Operating Instructions 05/2016
Assignment of shaft heights to terminal boxes
Not for explosion-proof versions
Terminal box
GT640
①
1XB1621
1XB1631
1XB1634
1XB9600
①
Description
25