Electrostatic Sensitive Devices - Siemens 1LA8 Operating Instructions Manual

Safety information

2.5 Electrostatic sensitive devices

Noise emissions
During operation, the machine's noise emission levels can exceed those permitted at the
workplace, which can cause hearing damage.
Take steps to reduce noise, such as introducing covers and protective insulation or adopting
hearing protection measures, so that the machine can be operated safely within your system.
2.5 Electrostatic sensitive devices
ESD protective measures
NOTICE
Electrostatic discharge
Electronic modules contain components that can be destroyed by electrostatic discharge.
These modules can be easily destroyed by improper handling.
To protect your equipment against damage, follow the instructions given below.
● Never touch electronic modules unless absolutely necessary in the course of maintenance
● If the modules have to be touched, the body of the person concerned must be
● Electronic modules should not be brought into contact with electrically insulating materials
● Always place electrostatic sensitive devices on conductive bases.
● Always pack, store and transport electronic modules or components in conductive
18
WARNING
and repair procedures.
electrostatically discharged immediately beforehand and be grounded.
such as plastic film, plastic parts, insulating table supports or clothing made of synthetic
fibers.
packaging, e.g. metallized plastic or metal containers, conductive foam material or
domestic aluminum foil.
SIMOTICS TN Series N-compact 1LA8
Operating Instructions 05/2016