Sharp sh906i Before Using page 25

2
When insert the AC adapter power plug into an
outlet or insert the DC adapter power plug into a
car cigarette lighter socket, charge start sound is
heard, charging LED illuminates, and charging
starts.
100 VAC
outlet
2
For AC adapter
3
When Charge end sound is heard and charging
LED turns off, charging is complete.
When removing the connector, always hold the release buttons
on both sides (1) and unplug it by pulling out horizontally (2).
1
2
1
Note
Do not forcibly insert or remove. May cause damage to the
external connector terminal and the connector.
2
Cigarette
lighter socket
For DC adapter
Pull the adapter out of the outlet or cigarette lighter socket if it will
not be used for a long time.
Do not forcefully pull the external connector terminal cover. May
damage the cover.
Do not place objects near the FOMA terminal when charging. The
FOMA terminal may be damaged. In addition, a display may be
damaged when charged in the viewer position.
When using a DC adapter
The DC adapter should only be used in negative grounded
vehicles (12 and 24 VDC).
Do not use with the car engine shut off. May drain the car battery.
The DC adapter fuse (2A) is a consumable. For replacement,
purchase a new fuse at a local automobile supply shop.
Refer to the FOMA DC Adapter 01/02 user's guide for details.
Charging using the desktop holder
[Read "Desktop holder SH19 (sold separately) user's
guide" carefully.]
Battery pack can be charged in the viewer position.
Charging is not available with the FOMA terminal open.
1
Face the side with the arrows of the AC adapter
connector up and insert it into the connector
terminal of the desktop holder.
Keeping the connector parallel with the desktop holder, firmly
push it all the way in until it clicks.
2
Insert the AC adapter power plug into an outlet.
Continued on next page
53