Sharp sh906i Before Using page 17

Retrieving a function from each start menu
For details on the available functions nP. 458
Use w and the Optical TOUCH CRUISER in either start menu.
Press the dial key corresponding to the menu item number (U, V,
W, etc.) to select a function. However, in the Custom menu, a
function may not be selected by using the menu item numbers.
The method for selecting functions may differ depending on the
Kisekae Tool set for the Custom menu.
Press c to re-select a function, and the previous screen
reappears. Press H to return to stand-by.
When a stock icon (nP. 38) appears in stand-by, select G to
show the start menu.
■ Retrieving from the Custom menu
Example: Activating 1Seg with Multi guide key or Optical TOUCH
CRUISER
For the ,, use the Optical TOUCH CRUISER to select an item.
The following shows the screen operated with the Optical TOUCH
CRUISER.
,
t
or
w
t
Custom menu When [1Seg] is
displayed
■ Retrieving from the Basic menu
Example: Activating 1Seg by entering function numbers
Note
,
t
or
w
t
When 1Seg is
activated
961
Basic menu
When the Custom menu image is changed by Kisekae Tool, the
operation may differ from the description in this manual. In this
case, switch the menu screen to the Basic menu (nP. 44) or
perform Reset menu screen (nP. 120).
When 1Seg is
activated
45