Sharp sh906i Before Using page 22

Inserting and removing the battery
pack
Use the battery pack SH17 exclusive to the FOMA terminal.
Turn off the power, close the FOMA terminal, and hold it in your
both hands before inserting or removing the battery pack.
■ Inserting
1
Lightly push the back cover in the direction of the
arrow (1), slide approximately 2 mm (2) and
remove the back cover (3).
2
Insert the battery pack (4).
The battery pack has tabs that make it easy to insert. Attach the
battery pack with a recycle mark side faced up.
Face the side with
a recycle mark up
Tabs
50
1
2
3
Battery pack
4
Tabs
Battery pack connector terminal side
3
Reattach the back cover (5).
Position the back cover as shown in the illustration and then
push the back cover and slide into place.
5
■ Removing
1
Follow step 1 of "Inserting" to remove the back
cover.
2
Remove the battery pack.
The battery pack has a tab that makes it easy to remove. Press
the tab with your fingers without placing too much force. Lift the
battery pack to remove.
Tab
Note
Using unnecessary force when inserting or removing the battery
pack may damage the connector terminal for the battery pack
(charger terminal) on the FOMA terminal.
Firmly close the back cover. If not closed firmly, the back cover
may come off and the battery pack may fall out due to vibration.