Remote Control; Operation - Dometic BR342 Installation And Operating Manual

OPERATING INSTRUCTIONS
C.Remote control
Selecting functional status
FIG. 24
Auto speed
Middle fan speed
Set point
Clock
Automatic mode
Cold mode
Turbo setting
Clock setting
Temperature/minutes
selection -
setting
D.

Operation

a. Press to switch on the machine.The previous
operating mode that was selected by the remote
control is automatically used.
b. Press MODE to select mode.
Automatic mode
In this mode the A/C will run automatically and the
running mode will be selected automatically by
comparing the set temperature with the internal
temperature according to table A.
For the automatic speed it wil be set according to
the difference temperature between the set point
and the ambient temperature.
TABLE A
Heat pump (HP model)
ventilation (A/C model)
Low fan speed
High fan speed
Turbo fan
mode
Heat pump
mode
Ventilation
mode
Dehumidification
mode
Fan setting
Temperature/Hours
selection +
Change mode
Time setting
Sleep
ON/OFF
Dehumidification (A/C model)
or
ventilation (HP model)
Cold mode
Press MODE button to select cold mode then set the
expected temperature between 18°C and
Press the fan speed button to select low, medium or high
fan speed or automatic speed.
Dehumidification mode
Press MODE button to select this function and set the
speed
expected tmeperature between 18°C and
The fan speed will keep the low level.
Ventilation mode
Press MODE button to select ventilation mode then the
low, medium or high speed or automatic speed.
Heat pump mode
(Reverse cycle where applicable) (Reverse cycle where applicable)
Press MODE button to select heat pump mode then set
the expected temperature between 18°C and
Press the fan speed button to select low, medium or high
fan speed or automatic speed.
Timer off function
setting
The machine must be on.
Press TIMER button to set the time when the machine
need to be switched off.
Press the selection button to change the time when the
machine need to be switched off.
Press the TIMER buttom to confirm the data entered.
Timer on mode
The machine must be off.
Press TIMER button to set the time when the machine
need to be switched on.
Press the selection button to change the time when the
machine need to be switched on.
Press the TIMER buttom to confirm the data entered.
Note: The timer ON and OFF function can only operate
when the hand held remote is in range and able to
communicate with the air conditioner at the set ti-
me.Remote range may vary depending on the ins-
tallation environment.
Fan speed
The icon indicate low speed of fan.
The icon indicate medium speed of fan.
The static icon indicate high speed of fan and
the icon is flash indicate automatic speed.
11
30°C.
30°C.
30°C.