Remote Control - Dometic Freshjet 1100 Operating Manual

Dometic FreshJet 1100
7.3
All settings of the device (e. g. temperature settings, timer programming) are
transmitted to the roof air conditioner by remote control.
The following control and display elements are available on the remote
control (fig.  , page 4) :
EN
Print to PDF without this message by purchasing novaPDF (http://www.novapdf.com/)

Remote control

No. Explanation
1 Digital display:
displays the following:
– Time
– Selected room temperature (target value) in °C or °F
– Actual room temperature
– Air conditioning mode
– Blower level
– Symbols for active additional functions
– Battery status
2
Button :
Switches the roof air conditioner and remote control on or to stand-by mode
3
Button :
Selects the blower setting
4 MODE button:
Selects the air conditioning mode
5 CLOCK button:
Sets the time
6 P.F. button:
No function assigned yet
7 TIMER button:
Sets the timer
8 SLEEP button:
Activates the sleep function. The sleep function automatically reduces the
target value to provide a pleasant sleeping temperature.
9 SET - °F/°C button:
Transmits current data to the roof air conditioner.
Confirms the time setting.
If temperature is displayed: switches between temperature units Celsius
(°C) and Fahrenheit (°F)
10 I FEEL button:
Activates the "I feel" function. Every 10 minutes, the "I feel" function adjusts
the target temperature to the temperature measured by the remote control.
The remote control must be pointed at the IR receiver (fig.  4, page 3) on
the control panel.
Technical description
43