Resetting The Label Maker - Brother P-TOUCH PT-H110 User Manual

6
HELPFUL HINTS (continued)
Short Cuts
Language
Width
Label Length
Margin
File
Decorative
Print Option
Feed
Unit
LCD contrast

Resetting the label maker

You can reset the label maker when you want to
restore it to factory settings, or in the event it is not
working correctly. All text, settings and stored files
are cleared.
1
Turn off the label maker, hold down
and , and then press
the label maker back on.
2
First release the power button, and then
release and
The label maker turns on with the internal
memory reset.
Space key
to turn
.
Should you encounter any problems with
your product, please do not return your
product to the store.
After referring to the User's guide, if you still
need assistance, contact Brother Customer
Service at:
Voice: 1-877-BROTHER
Web: www.brother-usa.com
Fax: 1-901-379-1210
If you need to locate a service center, please
call 1-877-BROTHER or visit
www.brother-usa.com
CAUTION
USING A COMBINATION OF DIFFERENT
BATTERIES (SUCH AS Ni-MH AND ALKALINE),
MAY RESULT IN AN EXPLOSION. DISPOSE
OF USED BATTERIES ACCORDING TO THE
INSTRUCTIONS.
NOTE
Battery Recommendations
• Remove the batteries if you do not intend to
use the label maker for an extended period
of time.
• Dispose of the batteries at an appropriate
collection point, not in the general waste
stream. In addition, be sure to observe all
applicable federal, state, and local
regulations.
• When storing or discarding the batteries, wrap
it (for example with cellophane tape), to
prevent it from short-circuiting. (See the
picture on the lower right)
(Battery insulation example)
1. Cellophane tape
2. Alkaline or Ni-MH
battery
2
1