Saving Label Files - Brother P-TOUCH PT-H110 User Manual

Printing Labels (continued)
NOTE
• When you set [Chain Print], feed the tape before
using the cutter otherwise a part of the text may
be cut off.
• When you set [Half] or [Narrow], displayed label
length is the length from the printed dots ( ) to
the end of the label. Cut along the printed dots
(:) with scissors.
LCD
Full
Half
Narrow
• To print more than one copy of a label with
minimum margin, set the margin to [Narrow].
• Do not pull the tape since this may damage the
tape cassette.
• After pressing
approximately one second.
Label image
ABC
2.7"
ABC
ABC
1.0"
, "Accepted" is displayed for

Saving Label Files

You can save up to 15 labels and recall them for
printing at a later date. A maximum of 80
characters can be saved per file, a maximum of
1200 characters can be saved in total memory.
You can also edit and overwrite the stored labels.
Save
Enter Text
Print
1.6"
Open
NOTE
• You can also enter the File menu by pressing
• If you try to store a label when there is already a
label stored to that number, a message
"Overwrite OK?" appears. Press
your new label. Press
• You must type text before starting the save
function.
• After pressing
approximately one second.
/ [Save]
/ [File]
/
[Print]
[Copies: ]
/ /
-
/
[File]
/ [Open]
/
.
, "Accepted" is displayed for
/
[File]
/
/
to save
to cancel.