Maintaining Your P-Touch Labeler; Resetting The P-Touch Labeler; Resetting The Data To Factory Settings (Label Collections Stored In Favorites Is Not Reset.); Maintenance - Brother P-touch PT-2030 User Manual

MAINTAINING YOUR P-TOUCH LABELER

You can reset the internal memory of your P-touch labeler when you want to clear all
saved label files, or in the event the P-touch labeler is not operating correctly.
Resetting the data to factory settings
(Label collections stored in Favorites is not reset.)
Turn off the machine. Press and hold down the Shift and R keys. While holding down the
Shift and R keys, press the Power key once and then release the Shift and R keys.
• Release the Power key before releasing the other key.
• All text, format settings, option settings and stored label files are cleared when you reset the
P-touch labeler. Language and unit settings will also be cleared
Your P-touch labeler should be cleaned on a regular basis to maintain its performance
and life span.
Always remove the batteries and disconnect the AC adapter before cleaning the P-touch labeler.

Cleaning the Unit

Wipe any dust and marks from the main unit using a soft, dry cloth.
Use a slightly dampened cloth on difficult to remove marks.
Do not use paint thinner, benzene, alcohol or any other organic solvent. These may deform the
case or damage the appearance of your P-touch labeler.

Cleaning the Print Head

Streaks or poor quality characters on printed
labels generally indicates that the print head is
dirty. Clean the print head using a cotton swab or
the optional print head cleaning cassette (TZ-
CL4).
• Do not touch the print head directly with your
bare hands.
• Refer to the instructions provided with the print
head cleaning cassette for directions on how to
use it.

Resetting the P-touch Labeler

Maintenance

Print head
Resetting the P-touch Labeler
1
2
3
4
5
6
7
8
9
53