Brother P-TOUCH PT-H110 User Manual page 8

2
BASIC USAGE (Continued)
Printing Labels (continued)
Using Print Options
[Numbering]
You can print a series of up to nine labels at a time
using auto-numbering. Using this feature you can
automatically increase a selected number by one
after each label is printed. The numbers of labels
you can print at one time are dependent upon the
initial number.
Example: To print copies of a label containing a
serial number (0123, 0124 and 0125)
Enter numbers
to the number you wish to increment
Option] [Numbering]
/
• Select the highest number you wish to be
printed when setting the number.
[Mirror]
Example: Follow the instructions below after
entering "J.SMITH" if you want to
Mirror Print "J.SMITH".
Enter text/characters
[Print Option]
[Mirror Print?]
• Use clear tape in [Mirror], so you can read the
labels correctly from the opposite side when
attached on glass, windows or other
transparent surfaces.
/ Move the cursor
/ [Print
/
/
[Mirror]
Setting Margin (
/
/ [Full/Half/Narrow/Chain Print]
[Full]/[Half]/[Narrow]
For leaving equal margins on both sides of the
text.
Half
Full
ABC
1" 1"
[Chain Print]
Use this setting when printing several labels with
minimum margins.
Enter text.
1.
Press , then [Copies: ] appears.
2.
Press / or enter number with
3.
number keys to select the number of copies.
Press . Printing starts, and then the
4.
message "Feed OK?" appears.
Press to enter more text.
5.
Clear the text, enter the text for the next label,
6.
and then press
When the message "Feed OK?" appears after
7.
the last label is printed, press
After the tape is fed, press the cutter lever to
8.
cut off the chain of labels.
)
[Margin]
Narrow
ABC ABC
0.16" 0.16"
0.47" 0.47"
.
.